FREE SHIPPING SITEWIDE | 30 DAY SATISFACTION GUARANTEED

How to Take Care Of Your Snake Plant
SHARE
Snake Plant Laurentii Cellar Door Plants

How to Take Care Of Your Snake Plant

Dracaena trifasciata, also known as the snake plant, is a popular and hardy houseplant species. It has stiff, sword-like leaves and can grow to be six inches to eight feet tall. Snake plants can be a variety of colors, but most have green-banded leaves with a yellow outer later.

These plants are simple to cultivate and, in many cases, nearly indestructible. They will thrive in brightly lit or nearly dark corners of the house. Snake plants grow slowly in indoor light, but increasing their exposure to light will boost growth if they get a few hours of direct sun. Spring is the best time to pot your plants.

snake plant laurentii

snake plant laurentii

How Big are Snake Plants

Snake plants are known to be slow growers when compared to other plants. When grown indoors, a healthy snake plant can reach a height of 8 feet, and when planted outdoors, it can reach a height of 12 feet. The width of the entire plant can range from 6 inches to 3 feet, depending on how tall it grows. They can grow anywhere from 10-24 inches per year.

A few important growth factors, such as light exposure, proper watering, and soil content, will determine how quickly and how much your indoor snake plant grows. The best way to ensure your snake plant’s continued growth is to properly care for and maintain it.

Watering your Snake Plant

Water your Snake Plant only every two weeks, allowing the soil to completely dry between waterings to avoid overwatering and root rot. During the winter, you can water your snake plant once a month if the soil is still moist after two weeks.

Fill up a watering can about half full with room temperature water and pour it on your plant. Allow the plant about an hour to drink the water that drains into the dish. Any water that has been left out for an extended period of time should be discarded. You can also place the plant in a sink or bathtub and run cool tap water over the soil. Allow the plant to completely drain before relocating it.

Humidity Levels for your Snake Plant

If your Snake Plant does not have enough humidity, it will begin to struggle for more moisture. Plants will show signs of thirst if they do not receive enough moisture. The following are the most common indications that your plant requires more humidity:

  • Brown edges appear on the leaves.
  • Plants begin to wilt and droop.
  • The leaves turn yellow.
  • The foliage becomes crispy.

Snake Plants, unlike other plants, are not fussy about humidity. However, if you believe that your Snake Plant is becoming overly stressed due to the humidity in your home, there are a few things you can do to improve its environment.

In general, snake plants will grow the best in a room with a humidity level of 40% and a temperature range of 60 to 80 degrees Fahrenheit. Although it is a hardy plant, if the humidity in the room rises or falls too far from this percentage, your plant may struggle to survive.

Guide for laurentii snake plant care

Guide for laurentii snake plant care

Grooming your Snake Plant

Pruning a Snake Plant is simple, whether it is overgrown or has some damaged leaves that you want to remove.

Simply cut off the stalks you want to remove at the base, as close to the soil as possible, with a sharp, clean blade. If the leaf is drooping, dry, or otherwise on its way out, you can try tugging and pulling it out from the root. If it’s ready, it’ll come out easily!

Lighting for your Snake Plant

Snake plants thrive in medium light. Because they prefer natural light, indirect sunlight is ideal for growing them.

A good location for your plant would be around an east-facing window, which receives a good deal of morning light. A snake plant thrives in the corner or center of a room that does not receive direct sunlight.

Snake plants can be grown in shady areas and under low-light conditions. Unlike most plants, these adaptable plants can tolerate higher and lower light levels. However, their growth rate may be slowed in these low-light environments.

If you place your snake plant in a dark corner of your office, it will not die from a lack of light. They are a nice plant choice for bedrooms.

It’s best to avoid placing snake plants in rooms without windows or natural light.

Soiling your Snake Plant

Collect your soil-mixing materials. 

Remove the plants from their containers. 

Measure how much soil mix you’ll need to raise the top of the root ball to 1/2′′ to 1′′ below the top of the new pot once the plant has been removed from the pot. Pour in the mixture.

Fill in the sides of the pot with the mix after you’ve placed the plant in it.

Sprinkle some worm compost on top, in a thin layer.

Common problems with Snake Plants

Overwatering

Drooping, yellowing leaves, and falling over are all signs of an overwatered snake plant. To prevent the snake plant from dying, remove it from its pot, cut off any rotting roots, and repot it with fresh potting mix. Place the plant in an area with plenty of indirect light.

Sansevieria plants are prone to overwatering, which frequently results in undesirable symptoms appearing on the leaves. This guide will teach you how to tell if your snake plant has been overwatered and how to help stop and save the plant from dying as a result of waterlogging.

The leaves of your snake plant will tell you if it is waterlogged. When a snake plant is overwatered, its leaves become heavy, squishy, and limp. They may also fall over from time to time. You can also check for wetness by pressing your index finger into the soil to see if there is any excess water.

Discoloration

The white-colored parts of variegated plants lack chlorophyll and thus cannot photosynthesize. If your spider plant is losing its green color, it is not absorbing enough sunlight energy to keep it healthy and vigorous. 

Overexposure to sunlight is the most common cause of leaf bleaching. Our skin tans or burns when exposed to too much sunlight, but sunburn causes plant leaves to bleach and blanch. If your spider plant is turning white, try moving it to a less direct light location first. Spider plants, in particular, dislike direct afternoon sun.

If your spider plant is losing its coloration and adjusting the lighting isn’t helping, it may be iron deficient. Try a fertilizer with higher nitrogen content, such as 12-5-7. Fluoride in tap water can also discolor spider plants and can be removed from the soil by thoroughly watering it with distilled water.

Get 10% discount on our entire store using Promo Code: CARETIPS

Bring Snake plant home

bring-snake-plant-home

How to do Plant Care with Cellar Door Plants

If you’re considering adding a snake plant to your family, visit our plant shop to make your purchase.

If you’re still debating, or not sure which plant is for you, give our Mystery Plant Subscription Box a try.

FAQs

How Often do Snake Plants need Watering

Snake plant varieties typically only require watering every 10 to 14 days, or when the soil becomes completely dry. Weekly watering should suffice during the summer months. During the winter, a monthly or bi-weekly watering should suffice. 
In summary:
Young plantlets: Two times a week during the warmer months, less during the winter.
Large plants: Every 10-14 days during the summer, less frequently during the winter.

How Big Should Snake Plant Pots be

Snake plants thrive in pots that are a little too small and crowded. They won’t be happy in too-large pots. The worst thing you could do is place your Snake Plant in a pot that is too large because the soil has a greater chance of becoming too wet. This is a guaranteed method for killing a Snake Plant.
When repotting, it is best to go up one size. For example, if your plant is in a 4′′ grow pot, the next size up is a 6′′ pot. When it comes to repotting, don’t be in a rush.

What is Good Placement for Snake Plant

Lower light can be tolerated by varieties with dark color leaves and/or less variegation. Low light doesn’t mean no light. Just keep in mind that Snake Plants grown in low light will grow more slowly and their leaves may lose some of their variegation.
Direct sunlight, on the other hand, might cause the leaves to burn. 

Is a Snake Plant Indoor or Outdoor

Snake plants can grow indoors or outdoors with little maintenance required.

Is Snake Plant Safe for Pets

Your pet should not be exposed to the air-purifying snake plant. They contain saponin, a toxic chemical that is toxic to dogs. Snake plants should be kept away from both dogs and cats. If your dog eats any part of the snake plant, it may develop gastrointestinal problems such as vomiting, drooling, nausea, and diarrhea.

0 0 votes
Article Rating
Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments
0
Would love your thoughts, please comment.x
()
x